Gifts Under $50

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, 120TPI construction, the 2x120TPI casing is supple and fast rolling with improved traction while providing high levels of support Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection EN:Wall – A butyl layer located within the casing ply that provides defence to cut and abrasion as well as providing extra sidewall support.

The Vector 4Seasons Ultra High-Performance road tire utilizes the latest developments in materials and construction methods to optimize performance and protection across a wide range of wet and dry conditions. Who rides this tire? As a serious competitor the Vector 4Seasons gives you the freedom to perform anywhere. Where does this tire perform best? With its reinforced sidewall and anti-puncture belt, the Vector 4Seasons is at home on any road you ride, at any time. FREEDOM TO PERFORM Riding in less-than-ideal conditions should not require a complete sacrifice in tire performance. The Vector 4Seasons brings ultra high performance to your daily ride, with low rolling resistance and added protection to keep you moving forward across a wide range of conditions. PERFORMANCE OVER MORE CONDITIONS The Vector 4Seasons features bead to bead Armor protection, R:Shield under-tread breaker belt and Dynamic:Silica4 compound for improved wet grip and durability. TUBELESS COMPLETE CONSTRUCTION Goodyear Bicycle Tires proprietary design that features all the benefits of a Tubeless Ready (TLR) tire with additional air retention properties. A Multi-compound material layer is added to our high-pressure Road-UHP tire casing allowing for improved air retention while providing additional puncture and cut protection with minimal weight increase. Our unique design means more sealant remains after installation, ready for the moment you need it. ARMOR PROTECTION Combining excellent anti-cut properties with minimal impact on casing suppleness and weight. Armor Protection enhances the Vector 4Seasons UHP road tire’s capabilities. DYNAMIC: SILICA4 COMPOUND The Vector 4Seasons brings Goodyear Ultra High-Performance to a broader range of conditions with a reinforced casing, wider tread cap and dedicated Dynamic:Silica4 compounding to minimize rolling resistance while enhancing wet grip.

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. Specialized Offset - This crank model is most suitable for Specialized Turbo systems using the ISIS mount including: Levo, Kenevo, Vado, Como, Turbo Levo e-bikes. Please note this model is not suitable for any Levo SL MTN E-Bikes using the Specialized SL 1.1 M30 motor. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Improved sealing to stop dirt ingress and to reduce drag - New Labyrinth seal has zero drag for incredible freewheeling performance - New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. - Increased engagement from 44 to 108 with a new offset 6 pawl freehub design - Wire cut pawls from high strength steel for maximum strength. - New step down axle design for a stiffer more durable freehub - New hub body profile for increased stiffness without adding weight - Fully serviceable and rebuildable with simple tools - Available with all modern freehub bodies - End spacers can be easily swapped to suit different frame and axle standards - 6 bolt only

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings....And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels. Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. Features >> Improved sealing to stop dirt ingress and to reduce drag >> New Labyrinth seal has zero drag for incredible freewheeling performance >> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. >> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design >> Wire cut pawls from high strength steel for maximum strength. >> New step down axle design for a stiffer more durable freehub >> New hub body profile for increased stiffness without adding weight >> Ebike Specific hub designed for the demands of ebikes >> Fully serviceable and rebuildable with simple tools >> Available in 24, 28, 32 and 36 hole drillings >> Available with all modern freehub bodies >> End spacers can be easily swapped to suit different frame and axle standards >> 6 bolt or Centrelock disc fitting

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings...And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels. Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. Features >> Improved sealing to stop dirt ingress and to reduce drag >> New Labyrinth seal has zero drag for incredible freewheeling performance >> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. >> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design >> Wire cut pawls from high strength steel for maximum strength. >> New step down axle design for a stiffer more durable freehub >> New hub body profile for increased stiffness without adding weight >> Ebike Specific hub designed for the demands of ebikes >> Fully serviceable and rebuildable with simple tools >> Available in 24, 28, 32 and 36 hole drillings >> Available with all modern freehub bodies >> End spacers can be easily swapped to suit different frame and axle standards >> 6 bolt or Centrelock disc fitting

The Tech 4 X2 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. Combine this with an updated X2 Postmount or Flatmount caliper a lightweight adjustable brake. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Maxium Rotor thickness for X2 caliper 2.3mm Flatmount Caliper Mount options: - Mount Z: Required to fit the X2 FM caliper onto Front Flatmount standard and use a Ø160 disc – Front Flatmount standard is typically found on road/gravel/CX forks - Mount Y: Required to fit the X2 FM caliper onto Rear Flatmount standard using Ø160 disc – Rear Flatmount std is typically found on the back of some road/grave/CX frame but also lately on light XC frames - The caliper will also fit directly on Flatmount rear standard using a Ø140 disc. - For more information please see Hope's guides in the manuals and diagrams section. **Note** - The Flatmount X2 caliper is designed for use with the Hope Tech 4, Tech 3, XCR Pro and Tech/Tech Evo levers only.

The XCR Pro lever is the ultimate in lightweight design. With a Carbon lever blade and titanium hardware, combined with an XCR X2 caliper you have the benchmark lightweight brake KEY FEATURES - Lightweight minimalist design - Carbon blade and titanium hardware - Lever reach adjustment - Hinge clamp for easy installation - CNC Machined from high grade forged aluminium billet - 10% Power increase over Race Evo lever - Postmount and Flatmount Caliper Options available - Crimped hose design on caliper - Rigid CNC'd one piece caliper - Lightweight aluminium backed pads - Compatible with all current Tech 3 shifter mounts - Available in Black, Silver, Bronze, Red, Blue, Orange & Purple - Available with black hose only - Weight from 199g - Maximum Rotor thickness for X2 caliper 2.3mm Flatmount Caliper Mount options: - Mount Z: Required to fit the X2 FM caliper onto Front Flatmount standard and use a Ø160 disc – Front Flatmount standard is typically found on road/gravel/CX forks - Mount Y: Required to fit the X2 FM caliper onto Rear Flatmount standard using Ø160 disc – Rear Flatmount std is typically found on the back of some road/grave/CX frame but also lately on light XC frames - The caliper will also fit directly on Flatmount rear standard using a Ø140 disc. For more information please see Hope's guides in the manuals and diagrams section. **Note** - The Flatmount X2 caliper is designed for use with the Hope Tech 3, XCR Pro and Tech/Tech Evo levers only.

- Ideal fit for very short stems with steep upward stem angles - 1cm rise in the base will allow larger cycling computers like the Garmin 1030 to nest securely above the stem without interference

- For Integrated Handlebar (one piece) bar/stem - Pro-level mount with -7 degree articulation for custom computer positioning - Lifetime warranty. CNC Machined. Black Anodized - GARMIN approved replaceable computer insert protects computer tabs - Combo- Computer and GoPro style camera/light compatible - M5 hardware included. If a smaller bolt required, use an 8.4mm washer to ensure a secure fit. - Made in House. Boise, Idaho USA

- CNC Machined Aluminum - Combo Compatible (K13-580 adapter sold separately) - GARMIN approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight- 50g Compatibility: - All Garmin Cycling Computers - Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)

- CNC Machined Aluminum - Combo Compatible (580 Add-On sold separately) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top - 123g / Bottom 242g - Weight: 63g - Mount Type: Clamp 31.8mm - Mount Weight: 53g Compatibly: - All Wahoo Cycling Computers- ROAM, BOLT, ELEMNT, MINI - Combo (GoPro-style light/camera interface) K13-4500-31.8-BLK

Thanks to the innovative formula of KMC GO CHAIN WAX, the premium KMC chains treated with our wax offer next to high efficiency an unrivalled durability. Compared to oil-based lubricants, waxed chains are less susceptible to dirt build-up, increasing drivetrain life and reducing cleaning intervals. - Compatible with all 11-speed derailleur systems - Waxed with KMC GO - Slotted inner- and outer plates and hollow pins - Perfect shifting thanks to Double X-Bridge - Includes a MissingLink - Size: 1/2" X 11/128" - Pin length: 5.65 mm - Weight per 110 links: 244 g - Length: 118 links

- Lighter and faster than the original - Control and predictability of the original but with less rolling resistance and weight - Front and Rear application

- Tubing Cutter - 1pc. - Syringe - 2pcs. - Bleed line - 2pcs. - Bleed Plug - 2pcs. - Compression sleeve nut - 2pcs. - Line Barb Fitting - 5 pcs. - Line compression Olive - 10 pcs. - Rotor bolts - 6 pcs. - Filling Adaptor - 1 pc. - Bleed plug for rim & Gusatv brakes - 2 pcs. - Cap screw Louise/Gustav - 2 pcs. - Transport device-all brks -1 pc. - Cap Screw Julie/Clara - 2 pcs. - 4mm allen bleed plugs for 2001 & older - Louise - 2 pcs. - Line Inserts - 5 pcs. - M4 Barb bleed fitting for 2001 & older - Louise - 1 pcs. - Caliper bolts - 2 pcs. - 0.02mm caliper shims - 20 pcs. - 1mm caliper shims - 10 pcs. - Compression washer Gustav - 2 pcs. - Torx tool 7.0 - 1 pc. - T25 Torx key - 1 pc. - 16 oz oil - 1 pc. *Please note that Installer Clamps are no longer included in the Dealer Service Kit

MAGURA is offering the Shiftmix clamp, which will help to optimize your cockpit. - Shift and brake lever are mounted by one clamp system to the bar saving weight and gaining space - Combines Sram Matchmaker controls with MAGURA brake lever assemblies

Featuring Infinity hubs, ID360 freewheel and Maxtal welded rims, this modern XC wheel lives up to the legendary Crossmax name: strong, reliable, and tubeless ready. The name Crossmax has a long history in the world of XC riding and racing and this new wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The rim is welded for added reliability and features a 25mm internal width with a hookless profile. The Infinity hub design optimizes lateral stiffness and spokes tension. Our Instant Drive 360 freewheel with a double ratchet system provides fast engagement and top-level reliability. The rear hub is compatible with Shimano HG9, Micro Spline and SRAM XD driver bodies. The Crossmax is available with 6-bolt or center lock brake mounts in 29" and 27", in Boost and non-Boost options. The wheel is delivered with valves, replacement spokes and accessories.  

With the all new Deemax Park, you can rest easy whether you are hitting the steeps or the jump park. These affordable wheels are fun and durable, and come in 29, 27.5 and 26. Commit with confidence on any terrain: The 32 J-bent spokes offer excellent resistance against the most violent impacts and abuses; Reduce the risk of flat tires thanks to PFP (Pinch Flat Protection) rim walls. An adapted wheel to every Gravity practices: adapted to multiple practices, Freeride, DH, Dirt jump, Enduro; Rear wheel available in 12x142 (26 single speed), Boost (12x148), and Super-Boost (12x157). Front wheel available in 20x110 Boost (convertible to 15X110 Boost). Easy to service and fix: Quick and easy to fix thanks to J-Bent spokes; Two replacement spokes delivered with every wheelset; Low maintenance ID360 hubs made of standard Mavic parts and easily removable without tools.

Locks your through axle wheel - Replaces Allen key and Quick release through axles - Easy one-time installation - Coded key to install, lock and unlock - Precision made for consistent function and long life

- Take your recovery to a whole new level - 20 grams of Plant based Protein - Whole Superfoods, Chia & Flax Seeds - Omega-3, fiber, and antioxidants for digestive health and more

Super Slick grease is a very thin and smooth grease that stays where you put it. The best for fork overhauls.

Hans Dampf has everything to increase enduro fun. Choose it for stunning handling and the highest puncture protection on demanding trails—ascent as well as descent. - Precisely tuned stud positioning for controlled and forgiving riding at the limit - The combination of large and small shoulder studs grants the rider optimal grip in numerous conditions - Semi-open blocks ensure optimal self-cleaning properties with low rolling resistance

Hurricane from Schwalbe.

THE FAT BIKE TIRE Extremely light. The large volume can be ridden with extremely low air pressure. Ideal on deep soil, rough and very loose terrain. - Open tread with medium stud height for excellent rolling resistance and low weight - Performance line - Addix compound - 1050g

Land Cruiser from Schwalbe.

Doesn’t matter whether Fixie, road bike or urban bike. Lugano II Endurance is a sportive tire and the perfect choice for all big city adventures. The extra reinforced tread center - made of improved Silica Compound - is durable and grippy at the same time. Weight: 490g

Urban, Individual and Dynamic: The completely revised Road Cruiser is impressive due to it's appealing tread design and use of Green Compound, a rubber made of renewable and recycled raw materials which is so good, that we can use it for the first time in a conventional bicycle tire. -Tread rubber made from renewable and recycled materials

- 10 Speed wide ratio cassette - Alloy spiders - Steel lockring - Fits Shimano/SRAM freehub - 448g (11-42); 414g (11-40)

- Black polymer spacers - Multiple speed options available